Abou Rayan, M.; B. Djebedjian and I. Khaled, (2001). Water supply and demand and a desalination option for Sinai, Egypt. Desalination, (136): 73-81.
ASABE STANDARDS, (2008). Design and installation of micro-irrigation systems. ASAE EP405.1 APR1988: 1-5.
Awe, G. O. and O. Kola, (2011). Performance evaluation of Bamboo (Bambusa Vulgaris, Schrad)-pipe and medi-Emitter in a gravity-flow drip irrigation. International J. of Agric. and Forestry, 1(1): 9-13.
Bralts, V.F. and I.P. Wu, (1979). Emitter flow variation and uniformity for drip irrigation. ASAE, St. Joseph, Michigan, USA: 79-2099.
Camp, C.R.; E.J. Sadler and W.J. Busscher (1997). A comparison of uniformity measure for drip irrigation systems. Transaction of the ASAE, 40: 1013-1020.
Clark, G. A.; D. Haman; J. F. Prochaska and M. Yitayew, (2007). Micro Irrigation for Crop Production (General system design principles). Elsevier: 161-215.
El-Awady, M.N.; A.M. El-Berry; M. A. El-Genaidy and A. M. Zayton, (2008). Hydraulic properties effect of filter media on emitter clogging proplems; Misr J. Agric. Eng., 25 (3): 824-836.
Elewa, H. and A. Qaddah, (2011). Groundwater potentiality mapping in the Sinai peninsula, Egypt, using remote sensing and GIS-watershed-based modeling. Hydrogeology J., (19): 613-628.
Ghaemi, A., (1998). Impact of different patterns of emitter clogging on hydraulic characteristics of micro-irrigation laterals laid on flat and sloped terrains, Ph.D. Th., Chemical and Bio-Resource Engineering., Fac. of Graduate Studies., British Columbia U.: 10-39.
Hassan, N. S. H., (2007). Evaluation of trickle irrigation designs based on uniformity concept. M.SC. Dept. of Agric. Eng. Fac. of Agric., Ain Shams U., Egypt: 18-33.
Keller, J. and D. Karmeli, (1974). Trickle irrigation design parameters. Transaction of the ASAE, Vol., 17(4): 678-684.
Kirnak, H.; E. Dogan; S. Demir and S. Yalcin, (2004). Determination of hydraulic performance of trickle irrigation emitters used in irrigation systems in the Harran Plain. Turk. J. Agric. Forest., (28): 223-230.
Moshe Sne, (2006). Guidelines for Planning and Design of Micro Irrigation In Arid And Semi-Arid Regions. International commission on irrigation and drainage (ICDI): 1-14.
Ozekici, B. and R. Sneed, (1995). Manufacturing variation for various trickle irrigation on-line emitters. Appl. Eng. Agric. St. Joseph. MI: ASAE, 1985-Mar. V.II (2): 235-240.
Ozekici, B. and S. Bozkurt, (1999). Determination of hydraulic performances of in-line emitters. Tr. J. of Agric. and Forestry, 23: 19-24.
Smajstrla, A.G.; B.J. Boman; D.Z. Haman; D.J. Pitts and F.S. Zazueta, (2011). Field evaluation of micro-irrigation water application uniformity. Agricultural and biological engineering department. Florida cooperative extension service. Institute of food and agricultural sciences, Florida U.
Tagar, A. A.; M. S. Mirjat; A. Soomro and A. Sarki, (2010). Hydraulic performance of different emitters under varying lateral lengths., Pak. J. Agri., Agric. Eng., Vet. Sci., 26 (2): 48-59.
)
View on SCiNiTO