تأثیر تقنیة الشتل المیکانیکی على الإنتاجیة لصنف القطن جیزة 86

نوع المستند : Original Article

المؤلفون

1 باحث بمعهد بحوث الهندسة الزراعیة - مرکز البحوث الزراعیة بالدقی - الجیزة - مصر.

2 باحث أول بمعهد بحوث الهندسة الزراعیة - مرکز البحوث الزراعیة بالدقی - الجیزة - مصر.

المستخلص

یعانی محصول القطن المصری من مشاکل عدیدة أهمها المنافسة الشدیدة التی یواجهها من المحاصیل الأخرى. و یتم زراعة القطن بالشتلات بهدف تقصیر موسم نمو القطن لتوفیر أو تقلیل تکلفة الإنتاج وإمکانیة زراعة القطن بعد محاصیل شتویة فی نفس المساحة إلى جانب توفیر بذرة القطن والمحافظة على نقاوة الصنف وخفض نسبة الإصابات المبکرة والمتأخرة ، لذلک فقد کانت فکرة هذا البحث وهى دراسة مدى تأثر الإنتاجیة و صفات جودة الألیاف و بعض الصفات الوراثیة لنبات القطن عند الزراعة بطریقتی الشتل الیدوی و الشتل المیکانیکی  .وقد أجرى هذا البحث باستخدام آلة شتل أمریکیة الصنع مارکة  Holland  لتناسب شتل القطن وتم  تقییم أدائها باستخدام المتغیرات التالیة:
السرعة الأمامیة تم استخدام أربعة سرعات أمامیة کانت 43‚1- 77‚1- 05‚2-44‚2 کم/س.
المسافة بین الجور تم الزراعة على ثلاثة مسافات بین الجور کانت 15‚0- 20‚0- 25‚0م.
عمق الشتل تم استخدام أربعة أعماق للشتل کانت   5-7-10-12سم.
طریقة الزراعة تم استخدام طریقتین (طریقة الشتل المیکانیکیة – طریقة الشتل الیدوی).
وتم الحصول على النتائج التالیة:
الظروف المثلی لتشغیل آلة الشتل کانت عند سرعة التقدم 77 ‚1کم/ ساعة و المسافة بین الجور 20‚0م  وعمق الزراعة 10سم.و عند هذه الظروف کانت الآلة تسجل إنتاجیة31‚7 قنطار/فدان و نسبة فقد فی الإنتاجیة 22‚0 قنطار/فدان.
أقصى سعة حقلیة للآلة کانت  711‚0فدان/ساعة سجلت عند سرعة التقدم 44‚2 کم/س و مسافة بین الجور 25‚0م. و عمق الزراعة 5 سم  و أقصى کفاءة للآلة کانت 1‚80% سجلت عند سرعة التقدم 43‚1 کم/س و مسافة بین الجور 25‚0م. و عمق الزراعة 5 سم  و أقصى إنتاجیة للمحصول کانت 61‚7 قنطار/فدان سجلت عند سرعة التقدم 43‚1 کم/س و مسافة بین الجور 25‚0م. و عمق الزراعة 5 سم بینما کانت اقل نسبة جور غائبة هی 7‚1% سرعة التقدم 44‚1 کم/س و مسافة بین الجور 15‚0م. و عمق الزراعة 12 سم .
کانت اقل نسبة جور مزدوجة الشتلات کانت 1.3% سرعة التقدم 43‚1 کم/س و مسافة بین الجور 25‚0م. و عمق الزراعة 12 سم بینما کانت أعلى نسبة انتظامیة فی معدل التغذیة 89.6% سرعة التقدم 43‚1 کم/س و مسافة بین الجور 15‚0م. و عمق الزراعة 5 سم.
طریقة الشتل المیکانیکی کانت لها تأثیر مباشر على جودة الصفات النباتیة للمحصول مقارنة بطریقة الزراعة بالشتل الیدوی.
طریقة الزراعة بالشتل المیکانیکی کان لها تأثیرا کبیر على جمیع الصفات التکنولوجیة للقطن الزهر مقارنة مع طریقة الزراعة بالشتل الیدوی .        

Abbas , A.M. (1981). Effect of some agricultural practices on growth and yield of cotton .M.Sc.Thesis ,Fac.Ag.,Al-AzharUniv., Cairo ,Egypt, 62-73.
Abou-Zeid, H.M; H.A. Abd El-Aali; A.A. Darwish and W.M. El-Shazly (1995). Transplanting and seedling age influence on agronomic performance of Giza cotton cultivar. Annuals Ag. Sci, Ain Shams Univ., Cairo, 40(2): 609-619.
ASTM (1989). Designatians:D,(1684-96). American society for testing and materials. Standards of Textile Testing and Materials. Society, Philadelophia, USA.
ASTM, Standards (1984). Designations: 1445-75. American society for testing and materials. Standards of textile testing and materials. The society, philadelaphia, USA.
Dong, H.Z.; Zhang, D.M.; Tang, W.; Li, W.J. and Li, Z.H. (2005). Effects of planting system, plant density and flower removal on yield and quality of hybrid seed in cotton. Field Crops Res., 93: 74-84.
El-Fowal, Y.A.A. (1996). A study on possibilities of mechanical wheat transplanting. M.Sc. Thesis, Fac. Ag., Al-Azhar Univ., Egypt.
El-Sahrigi, A.F., A.S., Kamel and S.I., El-Khatib (2001). A study on mechanization of cotton transplanting. Egypt J. Ag. Res. 79 ( 2): 740-756.
EL-Sayed. E.A.S. (1992). Effect of transplanting on growth and yield of cotton. M. Sc. Th., Tanta Univ., Egypt.
Greer, N.W.; K.S., Mclean; Kloepper, J.W. (2003). Potential of cotton transplants and rhizobacteria to shorten the growing season. In: Proceedings of the Beltwide Cotton Conference. 6(2):, 13-16.
Hamed, S.A., M.A.Ali , A.M. khalifa and A.M. Ismail (1993). A manual Feeding rice transplanter. J. Ag. Sci., Mansoura Univ. 8(1): 72- 80.
Hassan, I.S.M.; H.B. Abou-Tour and S.M. Seyam (2006). Evaluation and stability parameters of the hybrid G.84 (G.74×G.68) and four Egyptian extra-long staple cotton cultivars grown at North Delta, Egypt. J. of Appl. Sci. 21(8):59-73.
Herb, S.K., H.A. Abdell–Mawal and G.M. Salama (1993). Comparison between mechanichal and manual transplanting of tomato. Minia J. of Ag. Res. 15 (1): 361-375.
Imam, G.M.I. (1991). A study of some factors affecting yield and fiber properties in cotton. Ph.D. Thesis, Fac. Ag., Ain Shams Univ., Cairo, 113-120.
Karve, A.D. (2003). High yield of rainfed cotton through transplanting. Curr. Sci. 84 : 974-975.
May, O.L. and B.C.Bridges, Jr. (1995). Breeding cottons for conventional and late planted production systems. Crop Sci., 35: 132-136.
Radwan., F.E. (1988). Evaluation of some methods of cotton planting in relation to their effect on yield and quality .M.Sc. Thesis, Fac. Ag., Moshtohor, Zagazig Univ., Egypt, 72-77.
Salama, G.M.; A.M. Youssef and S.S.A. Farge (1995). Tomato plant growth and productivity as affected by method transplanting. Vegetable Res. Section. Hort. Res. Inst.. Ag. Res. Conter. Cairo, Egypt, 22 (2): 109-115.
Sales, E.; R., Kanhonou and C., Baixauli (2006). Sowing date, transplanting, plant density and nitrogen fertilization affect indigo production from Isatis species in a Mediterranean region of Spain. Ind. Crops Prod. 23 :29-39.
Self-El-Nasr, F.M., Z.M. Attia, H.E. Khalil, S.A.A. Shams and A.S. Kamel, 1996. Growing long duration winter crop in cotton rotation. Annuals of Agricultural Sci. Moshtohor, 34: 501-512.
Sherif, M.N.; M.S.M, Selim and A.S., Kamel (1995). Studies on some factors affecting seed and fiber properties of transplanted cotton. Annuals of Ag. Sci. Moshtohor, 33: 647-657.
Srivastava A. K.; C.E. Goering and R.P. Rohrbach (1995). Engineering principles of agricultural machine. ASAE Textbook Number b. American Society of Agricultural Engineers, 295 Niles Road, St.joseph, Michigan49085-9659, USA. 
Waddle, B.A. (1993). In: Cotton ,Ed. R. J. Kohel and C.F. Lowis, American Society of Agronomy, Crop Science Society of America and Soil Science Society of America: Madison, Wisconsin, USA.