Bergander, A. and Salmén, L. (2000). The transverse elastic modulus of the native wood fibre wall. Journal of Pulp and Paper Science: vol.26, No. 6: 234-238.
David, h. Myszka (2012). Machines and mechanisms applied kinematic analysis. Pearson education, inc., publishing as prentice hall, one lake street, upper saddle river, new jersey, 07458.
Gonçalves, R. and Néri A. C. (2005). Orthogonal cutting forces in juvenile and mature pines taeda wood, Sci. Agric. (Piracicaba, Braz.), 62(4), p. 310-318.
Ismail, Z. E. (2004). The first report of project (Developing the metering unite of the pneumatic planter) financed by Mansoura University researches unite.
Ismail, Z. E. (2009). Soil response to tillage treatments. Agricultural Mechanization in Asia, Africa and Latin America (AMA). Vol. 40, No. 4 autumn: 9-14.
Ismail, Z. E. and Abou Habaga, M. M. (2008). Theoretical approach to determine the share dimensions of uproot palm date. Misr. J. Ag. Eng., 25(3): 746-757.
Jernkvist, L. O. and Thuvander, F. (2001). Experimental determination of stiffness variation a cross growth rings in picea abies; Holzforschung Vol. 55, No. 3: 309-317.
Kajberg, J. and Wikman, B. (2007). Viscoelastic parameter estimation by high strain-rate experiments and inverse modeling – Speckle measurements and high speed photography; International Journal of Solids and Structures 44: 145-164.
Kline, W. A.; DeVor R. E. and Lindberg J. R. (1982). The Prediction of cutting forces in end milling with application to cornering cuts. Int. J. Mach. Tool Des. Res., 22 (1), p. 7-22.
Sutherland, J.W. and DeVor, R. E. (1986). An improved method for cutting force and surface error prediction in flexible end milling systems. Journal of Engineering for Industry, 108, p. 269-279.
Svensson, B. A. (2007). Frictional studies and high strain rate testing of wood under refining conditions. Doctoral thesis, Mid Sweden University, Department of Natural science, Sundsvall.
Thuvander, F.; Sjödahl, M. and Berglund, L.A. (2000). Measurement of crack tip strain field in wood at scale of growth rings; Journal of Materials Science 35: 6267-6275.
Tlusty J. S. S., (1991). An overview of modeling and simulation of the milling process. Journal of Engineering for Industry, 1991, 113, p. 169-175.
Toenshoff, H. K. and Denkena, B. (2013). Basics of cutting and abrasive processes. Lecture Notes in Production Engineering, DOI: 10.1007/978-3-642-33257-9_2, Springer-Verlag Berlin Heidelberg.
Uhmeier, A. (1995). Some fundamental aspects of wood chipping; Tappi J Vol. 78, No. 10: 79-86.
Wen-Hsiang Lai, (2000). Modeling of cutting forces in end milling operations. Tamkang Journal of Science and Engineering, 2000, 3(1), p. 15-22.
Zmitrowicz, A. (2006). Models of kinematics dependent anisotropic and heterogeneous friction; International Journal of Solids and Structures, 43(14-15):4407-4451.
)
View on SCiNiTO