تعطین الکتان باستخدام نظام الرش

نوع المستند : Original Article

المؤلفون

1 باحث- معهد بحوث الهندسة الزراعیة – مرکز البحوث الزراعیة – مصر.

2 باحث أول - معهد بحوث المحاصیل الحقلیة – مرکز البحوث الزراعیة – مصر.

المستخلص

تم إجراء هذه الدراسة بقسم بحوث الألیاف بمحطة البحوث الزراعیة بالجمیزة لتقییم طریقة تعطین الکتان باستخدام الرشاشات کطریقة جدیدة وصدیقة للبیئة لا یصدر عنها ملوثات للبیئة مقارنة بطریقة التعطین التقلیدیة (التعطین بالماء). تم تشغیل نظام الرش الدقیق تحت أربعة قیم لضاغط التشغیل هی (5، 7,5، 10 و 12,5) متر وقیمتان لزمن التشغیل (1,5 و 3) ساعة، حیث تم تقییم تأثیر ضاغط التشغیل على انتظامیة التوزیع وکذا تم دراسة تأثیر طریقتی التعطین على بعض المؤشرات وهی کمیة الماء اللازمة لتعطین طن القش، نسبة الألیاف، نعومة الألیاف، طول الألیاف وإنتاجیة الماء.
 أشارت أهم النتائج المتحصل علیها إلى ما یلی:
زیادة انتظامیة توزیع المیاه بزیادة ضاغط التشغیل، توفیر التعطین بالرش فی کمیة الماء اللازمة لتعطین طن القش حیث وصلت نسبة التوفیر إلی 20,3%.
التعطین التقلیدی أعطى نسبة ألیاف 16,4% بینما أعلى نسبة ألیاف مع التعطین بالرش کانت 15,5%، التعطین التقلیدی أعطى ألیاف بطول 87,5 سم بینما أعلى قیمة لطول الألیاف مع التعطین بالرش کانت 84,9 سم، التعطین التقلیدی أعطى أقل قیمة لنعومة الألیاف وهی 210 بینما التعطین بالرش أعطى القیم الأعلى والتى تراوحت ما بین 262 و 273. إنتاجیة الماء للتعطین التقلیدی کانت 15,7کجم/م3 بینما أعلى قیمة لإنتاجیة الماء مع التعطین بالرش کانت 18,6 کجم/م3.

الموضوعات الرئيسية


Evans, J. D.; D. E. Akin; W. H. Morrison and D. S. Himmelsbach (2002). Modifying Dew-Retted Flax Fibers by Means of Air-atomized Enzyme Treatment. Textile Res. J. 72, 579-585.
Hassan, M. H.; M. E. Kiwan; A. El-Amin and M. S. Abuarab (2007). Hydraulic characteristics and water distribution patterns of microsprinkler irrigation systems. Misr J. Ag. Eng., 24(4): 849- 885.
Henriksson, G.; K. E. L. Eriksson; L. Kimmel and D. E. Akin (1998). Chemical/Physical Retting of Flax Using Detergent and Oxalic Acid at High pH. Textile Res. J. 68: 942-947.
James, L.G. (1988). Principles of farm irrigation system design. John Willey/Sons (ed.), New York: 543.
Konczewicz, W.  and J. Wojtysiak  (2015).  The effect of physical factors on the process of physical-mechanical degumming of flax fibers. Textile Res. J. 85 (4): 391–403
Konczewicz, W.; M.  Zimniewska and M. A. Valera (2017). The selection of a retting method for the extraction of bast fibers as response to challenges in composite reinforcement. Textile Res. J. 0(00) 1–16.
Kozlowski, R.; W. Konczewicz and J. Wojtysiak (2006). Device for processing fibrous raw materials and the method of fibrous plants processing. Institute of Natural Fibers &Medicinal Plants. Poland. Patent application EP 2242876 B1, Date of filing: 23 November. European patent.
Mehawed, H. S.; A. M. El-Shazly and Y. E. Arafa (2013). Hydraulic performance assessment of sprinkler types for improving on- arm irrigation efficiencies. Third International Conference for Agricultural & Bio-engineering. Egypt. J. Ag. Res., 91 (2A):367-379.
Playan, E.; N. Zapata; J. M. Faci; D. Tolosa; J. L. Lacueva and J. Pelegrin (2006). Assessing sprinkler irrigation uniformity using a ballistic simulation model. Agricultural Water Management, 84 (1-2): 89-100.
Radwan, S. R. H. and A. Momtaz (1966). The technological properties of flax fibers and the methods of estimating them. El-Falaha J. 46(5): 466-476 (In Arabic).
Sanchez, I; N. Zapata and J. M. Faci (2010). Combined effect of technical, meteorological and agronomical factors on solid set sprinkler irrigation: I. Irrigation performance and soil water recharge in alfalfa and maize. Agricultural Water Management, 97 (10): 1571-1581.
Van Sumere, C. F. (1992). Retting of Flax with Special Reference to Enzyme-retting, in "The Biology and Processing of Flax," H. S. S. Sharma and C. F. Van Sumere, Eds., M Publications, Belfast, Northern Ireland, pp. 157.
Zhu, X.;  S. Yuan; J. Jiang; J. Liu and X. Liu (2015).Comparison of fluidic and impact sprinklers based on hydraulic performance. Irrig Sci. 33: 367–374.