Abdelraouf, R.E.; A. Saad; Azab, A.E.; Khater, A.E.; El-Shawadfy, M.A. and M.Fathy (2024). Improving the performance efficiency of the cutting drum in the agricultural waste cutting machine. Egypt. J. Agron. Vol. 46, No. 1, pp: 85 – 102.
Ansuree, P; S. Sudajan; C. Junsiri and K. Laloon (2021). Effect of mixing speed and time on the homogeneity of multi-particle size sugarcane leaves product in horizontal paddle mixer for pelletized. Bulgarian Journal of Agricultural Science, 27 (No 5), 1009–1019.
Biroun, M.H.; E. Sorensen; J.L. Hilden and L. Mazzei (2023). CFD modelling of powder flow in a continuous horizontal mixer. Powder Technology 428; 118843, 1-14. journal homepage:
www.journals. elsevier.com/ powder-technology.
Dodo, S.M., Abdulkadir, S.A., Abdulhamid, S. and U.M. Ahmad (2024). Development and evaluation of a multifunctional agricultural waste shredder-mixer machine. Savannah Journal of Science and Engineering Technology, 2(4), 173-180.
El-Gendy, H.A.; S.E. Badr and N.K. Ismail (2008). Develop a chopper to produce balance animal fodder from crop residues. 1st Int. Conf. of Researchers Org. Ag. Res. Center, "Animal Production Conf." 16-18- Oct.
Hadidi, Y.M. and N.K. Ismail (2006). Size reduction of some vegetable residues using friendly environmental machine. J. Agric Sci. Mansoura Univ., 31(7): 71-81.
Hande, A.S. and V. Padole (2015). Design and fabrication of portable organic waste chopping machine to obtain compost. Int J Innov Res Sc Tech, 2(3), 1-8.
Harnby N., Hawkins A.E. and I. Opalinski (1996). Measurement of the adhesional force between individual particles with moisture present. part 1: A review. Chem Eng Res Des.
Harnby, N.; A.E. Hawkins and I. Opalinski (1996). Measurement of the adhesional force between individual particles with moisture present. Part 2. A novel experimental technique. Chemical Engineering Research and Design 74, Part A, 616-626.
Huang, A.N. and H.P. Kuo (2014). Developments in the tools for the investigation of mixing in particulate systems - a review. Adv. Powder Technol. 25; 163–173, https://doi.org/10.1016/j.apt.2013.10.007.
Industrial Mixers (2022). Mixing systems and components for plants. Mixing Division,
www.mixitaly.com.
Ismail, N. K. (2001). Engineering studies on the processing of some agricultural wastes. PhD Thesis, Agriculture engineering dept., Fac. of Agric., Mansoura University.
Ismail, Z. E.; N.K. Ismail; Z.S. Hamza and M.I. Ghazy (2021). Arbitration Criteria for Garden Leftovers Pressing and Packaging. Journal of Soil Sciences and Agricultural Engineering, 12(11), 805-809.
Ismail, Z.E. (2002). The theoretical scope of a rotating agitator mixer to prepare the livestock alimentation. The 10th Annual conf. of the Misr of Ag. Eng., 16 – 17 October, Development of Ag. Eng. Tech. in The Arab and Islamic World, 81-94.
Ismail, Z.E.; M.M. Abo-Habaga; N.K. Ismail and A.S. Elsayed (2012). Qualifying of the rice straw chopping unit. J. of Misr Soc. of Agric. Eng. The 19th. Annual Conference of the Misr Soc. of Ag. Eng., 14-15 November: 421-430.
Khidr, R.E.; S. Abo Bakr; B. Farrag and R.M. El-Awady (2024). Agricultural residues and their utilization as alternative feed resources in Egypt: A Review Article. Issued by The Egyptian Society of Animal Production (ESAP) Egyptian J. Anim. Prod. 61(3):113-127.
Kumar, I.S. and T.H. Kumar (2015). Design and development of agricultural waste shredder machine. International Journal of Innovative Science, Engineering & Technology, 2(10), 164-172.
Lutade, S.; N. Lichade; N. Ingole; A. Pantawane; A. Shahu; Y. Dhanvijay and K. Pande (2020). Design and fabrication of solar operated waste leaf collector and shredder machine. International journal of innovative research in technology, IJIRT, V 6 Issue 12, ISSN: 2349-6002, 291-293
Marczuk, A.; V. Sysuev; A. Aleshkin; P. Savinykh; N. Turubanov and A. Tomporowski (2021). Theoretical studies of the interaction between screw surface and material in the mixer. Materials, 14, 962.
https://doi.org/10.3390/ma14040962.
Mostafa, M. A. (1979). Effect of some processing conditions on macaroni production. MSc Thesis, Agriculture Mechanization Dept., Fac. of Agric., Mansoura University.
Muňoz, G. S.; A. Butterbaugh; I. Leavesley; L. F. Manley; D. Slade and S. Bermingham (2018). A flowsheet model for the development of a continuous process for pharmaceutical tablets: an industrial perspective. AICHE J. 64; 511–525,
https://doi.org/ 10.1002/aic.15967.
Opalinski, I.; M. Chutkowski; M. Stasiak; K. Les; M. Olechowski and M. Przywara1 (2021). Studies on moisture effects on powder flow and mechanochemical improvement of powder flowability. Advances in Science and Technology Research Journal, 15(2), 228–246.
https://doi.org/10.12913/ 22998624/135395 ISSN 2299-8624, License CC-BY 4.0.
Osorio, J.G. and F.J. Muzzio (2016). Effects of processing parameters and blade patterns on continuous pharmaceutical powder mixing. Chem. Eng. Process. Process Intensify. 109; 59–67,
https://doi.org/10.1016/j.cep.2016. 07.012.
Qiu, Q.; H. Wang; Q. Zhang; A.S. Mgelwa; B. Zhu and Y. Hu (2022). Negative priming effect from tree leaf and root residues with contrasting chemical composition. Geoderma 427, 116118.
Sarnavi, H.J.; N. Mohammadi; M. Motlagh and R. Didar (2013). Dem model of wheat grains in storage considering the effect of moisture content in direct shear test.
Research Journal of Applied Sciences, Engineering and Technology 5(3):829-841.
Shenoy, P. (2014). Dry mixing of spice powders - investigation of effect of powder properties on mixture quality of binary powder mixtures. PhD Thesis, University College Cork. Type of publication Doctoral thesis Rights © 2014, Pooja Shenoy. - http:// creativecommons.org/licenses/ bync-nd/3.0/ Download date 2025-02-01 05:12:40 Item downloaded from https://hdl. handle.net/10468/2064
Suryawan, I. W. K.; I. Y. Septiariva; E. N. Fauziah; B. S. Ramadan; F. D. Qonitan; N. L. Zahra and J.W. Lim (2022). Municipal solid waste to energy: palletization of paper and garden waste into refuse derived fuel. Journal of Ecological Engineering, 23(4), 64-74.
Thakur, S.C.; H. Ahmadian; J. Sun and J.Y. Ooi (2014). An experimental and numerical study of packing, compression, and caking behavior of detergent powders. Particuology.
Zawiślak, K.; P. Sobczak and A. Wełdycz (2012). Mixing as ccp in the production of industrial feed “Proces mieszania jako ccp w produkcji pasz przemysłowych”. Journal of central european agriculture, 2012, 13(3), p.545-553, DOI: 10.5513/JCEA01/ 13.3.1088.
)
View on SCiNiTO