دراسات هندسیة على الأسطح الماصة لتحسین أداء المجمعات الشمسیة

نوع المستند : Original Article

المؤلفون

1 أستاذ مساعد - قسم الهندسة الزراعیة - کلیة الزراعة - جامعة المنوفیة - مصر.

2 مهندسة زراعیة - کلیة الزراعة - جامعة المنوفیة - مصر.

المستخلص

أجرى هذا البحث بمعمل الهندسة الزراعیة - کلیة الزراعة - جامعة المنوفیة، واستهدف استخدام مواد قابلة للتدویر کنزات الألمونیوم ذات تکلفة منخفضة لعمل مجمع شمسی یعمل بالهواء. و لدراسة الأداء الحراری وحساب الکفاءة الحراریة استخدام أربع أنواع من الأسطح الماصة للحرارة) طبقة واحدة من کنزات الالمونیوم - I طبقتین من کنزات الالمونیوم - II سطح مموج - III سطح أملس (IV عند ثلاث قیم من معدلات تدفق الهواء (0.0199-0.047-0.120کجم/ث) لکل نوع من المجمعات الشمسیة. تم قیاس الإشعاع الشمسی خارج المجمع الشمسی وقیاس درجات الحرارة وقیاس سرعة الهواء خارج وداخل المجمع الشمسی وتوصلت الدراسة إلى النتائج الآتیة:
1-      تتأثر الکفاءة الحراریة للمجمع بالتغیر فی الاشعاع الشمسی وشکل السطح الماص وسرعة تدفق الهواء خلال المجمع.
2-     أعطی معدل التدفق 0.047کجم/ث أعلی کفاءة حراریة بینما کانت اقل کفاءة حراریة مع معدل التدفق 0.0199کجم/ث.
3-     المجمع الشمسی الأول طبقة واحدة من کنزات الالمونیوم وجد أنه أکثر کفاءة وفعالیة والمجمع الرابع السطح الأملس هو الأقل فی الکفاءة.
4-      استخدام المواد القابلة للتدویر فی بناء أسطح ماصة للمجمعات الشمسیة یؤدی إلى خفض التکلفة والمحافظة على البیئة.

الكلمات الرئيسية

الموضوعات الرئيسية


 Akpinar. E. K.; and F. Kocyigit (2010) "Energy and exergy analysis of a new flat plate solar air heater having different obstacles on absorber plates". Applied Energy; 87: 3438–3450
 Al varez, G.; J. Arce.; L. Lira.; and M.R. Heras (2004) "Thermal performance of an air solar collector with an absorber plate made of recyclable aluminum cans". Solar Energy; 77:107–13.
Chukwujindu, N.S (2017) "A comprehensive review of empirical models for estimating global solar radiation in Africa". Renewable and Sustainable Energy Reviews; 78: 955–995.
El-Sebaii, A.A.; S. Aboul-Enein.; M.R.I. Ramadan.; S.M. Shalaby.; and B.M. Moharram (2011) "Thermal Performance investigation of double pass-finned plate solar air heater". Applied Energy; 88(5):1727–1739.
Escobedo, Q.H.; F. Manzano-Agugliaro; and A. Zapata-Sierra (2010) "The wind power of Mexico". Renewable & Sustainable Energy Reviews; 14:2830 – 2840.
Jamil, B; and N. Akhtar (2017) "Comparative analysis of diffuse solar radiation models based on sky clearness index and sunshine period for humid-subtropical climatic region of India: A case study." Renewable and Sustainable Energy Reviews, 78: 329–355.
Kabeel, A.E.; A.S.M. Khalil Shalaby; and M.E. Zayed (2016) "Investigation of thermal performances of flat, finned, and V-corrugated plate solar air heaters. " Solar Energy Engineering; 138: 051004-051007.
Kalogirou, S. A (2004) "Solar thermal collectors and applications". Progress in Energy and Combustion Science; 30:231–295.
Kurtbas, I.; and E. Turgut (2006) "Experimental investigation of solar air heater with free and fixed fins: efficiency and exergy loss". International Journal of Science & Technology, 1: 75-82.
Omojaro, A.P.; and L.B.Y. Aldabbagh (2010) "Experimental performance of single and double pass solar air heater with fins and steel wire mesh as absorber". Applied Energy; 87:3759-3765.
Saxena. A; Varun; and A.A. El-Sebaii (2015) "A thermodynamic review of solar air heaters". Renewable and Sustainable Energy Reviews, 43:863–890.
Varun; R.P. Saini.; and S.K. Singal (2007) "A review on roughness geometry used in solar air heaters". Solar Energy; 81:1340–1350.