EFFECT OF FISHMEAL REPLACEMENT WITH CHEESE PROCESSING BY-PRODUCT MEAL ON FISH PELLET QUALITY USING RING DIE PELLETING MACHINE

Document Type : Original Article

Authors

1 Assistant professor, Central Lab. for Aquaculture Res., Agric. Res. Cent.,Egypt.

2 Lecturer, Agric. Eng. Dept., Fac. of Agric., Zagazig Univ., Egypt.

Abstract

This study was performed to use the cheese processing by-product meal (CPBM) as an alternative source of protein instead of the expensive herring fish meal (HFM) in the practical diet of Nile tilapia fingerlings. Three feed blends containing 30% of protein were formulated with three different percentages of CPBM replacement of 0.0 (HFM=100%), 50 and 100% The ingredients of these blends were pelleted using a ring die pelleting machine at roller clearance of 0.0, 1.5 and 3 mm and different moisture contents of 15, 20 and 25% to investigate the effect of the mentioned operating parameters on machine performance measurements, pellets quality as well as the fish growth performance. The obtained results revealed that ,CPBM percentage of 100% ,roller clearance of 0 mm and moisture content  of 15% to achieve the highest values of machine productivity  of 62 kg/h, pelleting efficiency of 94.50%, lowest specific energy consumption of 26.70 kW.h/Mg and the lowest cost per mass unit of 2978.00 L.E/Mg, while the highest values of  durability(93.50%) and pellets bulk density  (940 kg/m3)were recorded at roller clearance of 1.5 mm, CPBM percentage of 100% and moisture content  of 15%.The results showed that the complete replacement of HFM by CPBM saved the cost per mass unit with about 822 L.E/Mg. For fish growth performance, results showed that the complete replacement of CPBM fish diets gave no significant (P > 0.05) effect on growth performance compared to fish fed the HFM, also no disparity in growth response of fish, efficiency of feed utilization, survival rate and did not affect fish composition of dry matter, protein, or fat .So, CPBM can be used as a cheap source of protein in Nile tilapia diets instead of HFM .

Keywords


AOAC Association of Official Analytical Chemists ,(2003). Official Methods of Analysis of Association of Official Analytical Chemists International, 17th. Gaithersburg, Massachusetts, USA.
ASAE (1996). American society of Agricultural Engineers Standards- Engineering practices, and Data, ASAE standard book.
Behnke, K.C. (2001). Factors influencing pellet quality. Feed Tech., 5 (4): 19-22.
El-Sayed, A. F.M. (2004). Protein nutrition of farmed Tilapia: searching for unconventional sources. In: R. Bolivar, G. Mair, K. Fitzsimmons (Editors). New dimensions in farmed tilapia: proceedings of the 6th International Symposium on Tilapia Aquaculture (2004), Manila, Philippines, 364–378 pp.
Fasina,O.O; W.Wood; F. yucheng and M. German(2004). Physical characteristics of Pellets from poultry litter. An ASAE/CSAE Annual International Meeting. Ottawa, Ontario, Canada, 1- 4 August. Paper No. 046005.
Naylor, R.L.; R.W. Hardy; D.P. Bureau; A. Chiu; M. Elliott; A.P. Farrell; I. Forster; D.M. Gatlin; R.J. Goldburg; K. Hua and P.D. Nichols (2009). Feeding aquaculture in an era of finite resources. Proceedings of the National Academy of Sciences of the United States of America, 106: 15103–15110 pp.
Reimer, L. (1992). Conditioning, In: Proc. Northern Crops Institute Feed Mill Management and Feed Manufacturing Technology,Short Course, 7. California Pellet Mill Co. Crawfordsville, IN.
Robohm, K.F. and J. Apelt (1989). Die automatische Spaltweitenverstellung. Mlhle Mischfutter., 126: 271-275.
Tacon, A.G.J. and I.P. Forster. (2000). Global trends and challenges to aquaculture and aqua-feed development in the new millennium. International Aqua-feed–Directory and Buyers Guide 2001, pp. 4-25, Turret RAI, Uxbridge, Middlesex, UK.
USDEC (2004). Products definition, composition, functions. Reference Manual for U.S. Whey and Lactose Products, 27–40 pp.