ESTIMATION OF SOME POSTHARVEST LOSSES IN TOMATO DURING SIMULATED TRANSPORT OPERATION

Ghazal, A. F.; El-Masry, G. M.; El-Sheikh, I. H.; Radwan, S. M.

doi:10.21608/mjae.2017.97111

ESTIMATION OF SOME POSTHARVEST LOSSES IN TOMATO DURING SIMULATED TRANSPORT OPERATION

Document Type : Original Article

Authors

¹ Demonstrator, Agric. Eng. Dept., Fac. of Agric., Suez Canal Univ., Egypt.

² Associate Prof., ***Prof. of Agric. Eng., Agric. Eng. Dept., Fac. of Agric., Suez Canal Univ., Egypt.

³ Prof. of Agric. Eng., Agric. Eng. Dept., Fac. of Agric., Suez Canal Univ., Egypt

10.21608/mjae.2017.97111

Abstract

This study was conducted to estimate the extent of the damage occurred in tomato crop during transportation. A simulation prototype for transport process was designed and five levels of vibration frequency (5, 7.5, 10, 12.5 and 15 Hz), three vibration durations (30, 60, 90 min) and three box positions (top, middle and bottom) were used to estimate the mechanical damage occurred in tomato fruits. The damage was evaluated based on three different parameters (damage ratio, the equivalent bruise index "EBI" and bruise area index "BAI"). Also, the effect of the studied variables was investigated on weight loss and firmness. The results revealed that damage ratio, EBI, BAI and weight losses increased and firmness values decreased by increasing vibration duration especially in the upper boxes for all vibration frequency levels. The results showed that the highest values of damage ratio, EBI, BAI and weight losses and the lowest value of firmness were recorded at the upper box when the simulation system was operated at vibration frequency of 7.5 Hz for a duration of 90 min compared to the other frequency levels. The information obtained from this study is very important when designing handling equipment, suspension systems, conveyor belts and packaging methods to reduce mechanical damages of fruits and vegetables.

Keywords

Main Subjects

Processing Engineering of Agricultural Products

References

Aliasgarian, S.; Ghassemzadeh, H. R.; Moghaddam, M. & Ghaffari, H. (2013). Mechanical Damage of Strawberry During Harvest and Postharvest Operations. World Applied Sciences Journal, 22(7):969-974.

Amer Eissa, A. H. & Azam, M. M. (2011). Dynamic Behavior of Fresh Apple Fruit under Transport Conditions.1-19.

Bani, R.; Josiah, M. & Kra, E. (2006). Postharvest Losses of Tomatoes in Transit. Agricultural mechanization in asia africa and latin america, 37(2):84.

Batu, A. (1998). Some Factors Affecting on Determination and Measurement of Tomato Firmness. Turk. J. Agric. For, 22:411-418.

Cao, S.; Hu, Z. & Pang, B. (2010). Optimization of Postharvest Ultrasonic Treatment of Strawberry Fruit. Postharvest biology and technology, 55(3):150-153.

Demіr, F.; kara, Z. & Carman, K. (2010). Table Grapes Transport Simulation Study by Bardas (Vitis Vinifera L.) Cultivar Grown in Karaman Turkey.

Fischer, D.; Craig, W.; Watada, A.; Douglas, W. & Ashby, B. (1992). Simulated in-Transit Vibration Damage to Packaged Fresh Market Grapes and Strawberries. Applied engineering in agriculture, 8(3):363-366.

Ghazavi, M. A.; Karami, R. & Mahmoodi, M. (2012). Modeling Some Physico-Mechanical Properties of Tomato. Journal of Agricultural Science, 5(1):210-223.

Idah, P. A.; Yisa, M. G.; Ogbonnaya, C. & Morenikeji, O. O. (2012). Simulated Transport Damage Study on Fresh Tomato (Lycopersicon Esculentum) Fruits. Agricultural Engineering International: CIGR Journal, 14(2):119-126.

Jing, Y.; Fu, M.-r.; Zhao, Y.-y. & Mao, L.-c. (2009). Reduction of Chilling Injury and Ultrastructural Damage in Cherry Tomato Fruits after Hot Water Treatment. Agricultural Sciences in China, 8(3):304-310.

Jung, H.-M. & Park, J.-G. (2012). Effects of Vibration Stress on the Quality of Packaged Apples During Simulated Transport. Journal of Biosystems Engineering, 37(1):44-50.

Kader, A. A. (2005). Increasing Food Availability by Reducing Postharvest Losses of Fresh Produce. International Postharvest Symposium 682:2169-2176.

Li, Z. & Thomas, C. (2014). Quantitative Evaluation of Mechanical Damage to Fresh Fruits. Trends in Food Science & Technology, 35(2):138-150.

Lü, E.; Lu, H.; Zhang, D.; Yang, Z. & Liu, Y. (2010). Investigation and Analysis of Fruits and Vegetables Transportation. Pittsburgh, Pennsylvania, June 20-June 23, 2010: American Society of Agricultural and Biological Engineers:1.

Lu, F.; Ishikawa, Y.; Kitazawa, H. & Satake, T. (2010). Impact Damage to Apple Fruits in Commercial Corrugated Fiberboard Box Packaging Evaluated by the Pressure-Sensitive Film Technique. Journal of Food, Agriculture and Environment, 8(2):132-136.

Mohsenin, N. N. (1986). Physical Properties of Plant and Animal Materials: Structure, Physical Characteristics and Mechanical Properties. Gordon and Breach Science Publ., New York, NY, USA., Vol. 1.: 20-841.

O'Brien, M. & Bridley, R. (1970). Measurement of Vibrations Related to Harvesting and Handling of Fruits and Vegetables. Transactions of the ASABE [American Society of Agricultural and Biological Engineers], 13 (6):870-873.

O'Brien, M. & Guillou, R. (1969). An in-Transit Vibration Simulator for Fruit-Handling Studies. Transactions of the ASABE [American Society of Agricultural and Biological Engineers], 12(1):94-97.

O'Brien, M.; Gentry, J. P. & Gibson, R. C. (1965). Vibrating Characteristics of Fruits as Related to in-Transit Injury. Transactions of the ASABE [American Society of Agricultural and Biological Engineers], 8(2):241-0243.

Rosa, S. (2006). Postharvest Management of Fruit and Vegetables in the Asia-Pacific Region/Asian Productivity Organization. Food and Agricultural Organization (FAO):15-307.

Rostampour, V.; Motlagh, A. M.; Komarizadeh, M. H.; Sadeghi, M.; Bernousi, I. & Ghanbari, T. (2013). Using Artificial Neural Network (Ann) Technique for Prediction of Apple Bruise Damage. AJCS, 7(10):1442-1448.

Sadrnia, H.; Rajabipour, A.; Jafary, A.; Javadi, A. & Mostofi, Y. (2007). Classification and Analysis of Fruit Shapes in Long Type Watermelon Using Image Processing. Int. J. Agric. Biol, 1(9):68-70.

Shahbazi, F.; Rajabipour, A.; Mohtasebi, S. & Rafie, S. (2010). Simulated in-Transit Vibration Damage to Watermelons. Journal of Agricultural Science and Technology, 12:23-34.

Singh, S. & Xu, M. (1993). Bruising in Apples as a Function of Truck Vibration and Packaging. Applied engineering in agriculture, 9(5):455-460.

Timm, E.; Brown, G. & Armstrong, P. (1996). Apple Damage in Bulk Bins During Semi-Trailer Transport. Applied engineering in agriculture (USA), 12(3):369-377.

Van Dijk, C.; Boeriu, C.; Peter, F.; Stolle-Smits, T. & Tijskens, L. (2006). The Firmness of Stored Tomatoes (Cv. Tradiro). 1. Kinetic and near Infrared Models to Describe Firmness and Moisture Loss. Journal of Food Engineering, 77(3):575-584.

Vergano, P.; Testin, R. & Newall Jr, W. (1991). Peach Bruising: Susceptibility to Impact, Vibration, and Compression Abuse. Transactions of the ASABE (USA), 34 (5):2110-2116.

Vursavuş, K. & Özgüven, F. (2004). Determining the Effects of Vibration Parameters and Packaging Method on Mechanical Damage in Golden Delicious Apples. Turkish Journal of Agriculture and Forestry, 28(5):311-320.