GEOMETRIC SHAPE AND FORCE REQUIRED TO RUPTURE WATERMELON SEED (Colocynthis citrullus)

Document Type : Original Article

Authors

1 Assoc. Prof., Ag. Eng. Dept., Fac. of Ag., Al-Azhar Univ., Cairo., Egypt.

2 Lect., Ag. Eng. Dept., Fac. of Ag., Al-Azhar Univ., Cairo.,Egypt.

Abstract

This research aims to studying the geometric shape of watermelon seeds (Colocynthis citrullus) and force required to rupture these seeds under different moisture levels and at two orientations of the seed (axis of symmetry of the seed is vertical and horizontal) . A geometric shape of the seed was suggested to compare between calculated volume of the seed according to this suggestion and its actual volume showed that calculated volume is reliable. The study showed that within the range of moisture content of the tested seeds, the force required to rupture the seed decreases as moisture content increases and magnitude of this force is higher when this axis of symmetry of the seed subjected to this force is vertical. The greatest rupture force (seed axis of symmetry is vertical) is 57.2 N and is 47 N when axis is horizontal.

Main Subjects

References

Oyenuga V. A. and B. A. Fetuga (1975). Some aspects of  biochemistry and nutritional value of watermelon. J. of  Sci. of Food and Ag. 26(6): 843 – 854.       
Suthar S. H. and S. K. Das (1998). Fracture resistance of karingda (Citrullus lanatus) seeds to compressive loading. J.  Food Eng. 34: 77 – 90.   
Das S. K. and R. K. Gupta (2000). Fracture resistance of sunflower seed and kernal to compressive loading. J.  Food Eng. 46(1): 1 – 8.
Tavakoli H., S.S. Mohtasebi, A. Rajabipour and M. Tavakoli (2009). Effects of moisture content, loading rate, and grain orientation on fracture resistance of barley grain.RES. AGR. ENG. 55(3): 85 – 93.
Brubai W., A. J. Akor, A. H. Igoni and Y. T. Puyate (2008). Fracture resistance of African nutmeg (Monodora myristica) to compressive loading. Am.-Eurasian J. of Sci. Res. 3(1): 15 – 18.
Saiedirad M. H., A. Tabatabaeefar, A. Borghei, M. Mirsalehi, F. Badi and  M. G. Varnamkhasti (2007). Effects of moisture content, seed size, loading rate and seed orientation on force and energy required for fracturing cumin seed (Cuminum cyminum ) under quasi-static loading.  J.  Food Eng. 86: 565 – 572.
Zaalouk A. K., M. A. Mosallam, A. A. El-Meseery (2005). Some physical and mechanical properties of been seeds. Misr J. Ag. Eng. 22(3): 1041 – 1058.
Larson R. and R. P. Hostetler (2001). College Algebra. Hought Co., USA. App.:127.  
Zaalouk A. K. and T. H. Ghanem (2003). Some physical and mechanical properties of cowpea seeds. Misr J. Ag. Eng. 20(2): 363 – 379.
Mohsenin N. N. (1970). Physical propertiesof plant and animalmaterials. Gordon and esearch science publishers . Volume 1: 66 -67.

Files

Share

How to cite

Statistics