CONSTRUCTION AND EVALUATION OF PROTOTYPE SCREW PELLETING MACHINE FOR SUGAR BEET TOPS

Document Type : Original Article

Authors

Sen. Res., Ag. Eng. Res. Inst., Ag. Res. Center, Dokki, Giza, Egypt.

Abstract

The objective of the present study is to construct and evaluate a prototype screw pelleting machine to be used for sugar beet tops. Pelleting machine was fabricated on a private workshop in Dosuq City and tested at Sakha Animal Production Research Station Kafr El-Sheikh Governorate during summer season of 2010. The effect of screw revolving speeds, raw material moisture content and die hole diameters on machine productivity, power requirement, energy consumed and pelleting cost. Also, the effect of tested parameters on pellets quality such as stiffness, durability and pellets bulk density were taken into consideration. Hence the pellets were subjected to heated air at 70 oC, during their treatment in the drying unit. Results indicated that, the optimum operating conditions of the proposed prototype was at screw revolving speed of 180 rpm, raw materials moisture content of 25.74 % (w.b) and die hole diameter of 16 mm. Whereas, it gave machine productivity of 0.098 Mg/h, power requirement of 3.10 kW and energy consumed of about 31.71 kW.h/Mg. Moreover, the optimum operating conditions gave the best pellets quality as well as pellets stiffness of 135.5 N, durability of 95.43 % and pellets bulk density of about 2.136 g/cm3. However, the cost calculations  proved that, the pelleting cost by using the proposed prototype was reached about 105.20 EGP/Mg.

Main Subjects

References

Association of Official Analytical Chemists (1994).  Official Methods of analysis 20th ed. Artington, VA.
Abd El-Rahim, Y.M.; A.S.Huzayyin and I.S.Taha (1981). Dimensional analysis and wafering cotton stalks. Trans. of the ASAE, 24 (4): 829-832.
Bowers, W. (1987). Fundamentals of machine operation Machinery management. Text Book. Deere and Company Moline: 91.
Dobie, J. B. (1959). Engineering appraisal of hay pelleting. Ag. Eng., 40: 76-93.
Dobie, J.B. (1961). Materials handling systems for hay wafers. Ag. Eng., 42 (12) : 692-667.
Fasina, O.O and S. Sokhansanj (1992). Hygroscopic moisture absorption by alfalfa cubes and pellets.Trans. of the ASAE, 35 (5): 1615-1619.
Gupta, P.D. (2001). Mechanization of harvesting pelleting and densitying operations in forages. ASAE, Annual International Meeting.
Ismael, N. K. (2001). Engineering studies on the processing of some agricultural wastes. Ph.D. Thesis, Fac. of Ag., Mans. Univ., Egypt.
Kaddour, U. A; T. R. Owies and H. A. El-Gendy (2005). A study on the effect of using steam-lock in extruder pelleting machine to produce floating fish feed pellets.
Kholief, R. M. (1996). Manufacturing of pellets production machine for livestock. Ph.D Thesis, Fac. of Ag., Kafrelsheikh, Tanta Univ., Egypt.
Khalil, A. A. (2001). Productivity performance of growing lambs fed complete  pelleted rations cantaining different levels of dried sugar beet tops. M.Sc. Thesis, Fac. of Ag., Kafrelsheikh, Tanta Univ., Egypt.
Lockwood, F. B. and R. Dunstan (1971). Electrical engineering principles. Meinemann Educational Books, Ltd. London.
Martin, J. H.; W. H. Leonard and D. L .Stamp (1976). Principles of field crop production. 3rd ed., Macmillan Pubi Co., Inc.New York: 877-897.
Agricultural Statistics Ministry of Agriculture. (2009). Ministry of Agriculture and Land Reclamation, Economic Affair Sector.
Ramadan, M. H. (1980). Studies on manufacturing livestock pellets. M.Sc. Thesis, Fac. of Ag., Mansoura Univ., Egypt.
Susawa, K. (1978). Roughage wavering techniques in Japan. JARQ, 12(1): 17-21, Tropical Agriculture Research Center, Japan.
المراجع العربیة:                                                            
- الهیئة المصریة العامة للتوحید القیاسی (1987)0 المواصفات القیاسیة المصریة 3/987  الأعلاف المصنعة ومواد العلف الخام.

Files

Share

How to cite

Statistics