DEVELOPMENT A MACHINE FOR PICKING CALENDULA INFLORESCENCES TO SUIT THE SMALL HOLDING FARMERS

Mohamed, Tarek H.; Mosa, Sahar E.; Hamad, Tarek O.

doi:10.21608/mjae.2020.103158

DEVELOPMENT A MACHINE FOR PICKING CALENDULA INFLORESCENCES TO SUIT THE SMALL HOLDING FARMERS

Document Type : Original Article

Authors

¹ Sen. Res., Ag. Eng. Res. Inst., ARC, Dokki, Giza, Egypt.

² Res., Ag. Eng. Res. Inst., ARC, Dokki, Giza, Egypt.

10.21608/mjae.2020.103158

Abstract

The experiments were carried out at Tamiya, Fayom, Egypt for developing a Calendula inflorescence picking machine suit to the small holding farmers. The machine was consisted of a cutting head and knapsack air vacuum unit. The cutting head was equipped with two saw discs rotating underneath calibration fingers. These fingers were used to measure the correct flowering stem length before cutting. Three types of cutting saw discs (plan,50teeth, and 100 teeth) were used at five disc speeds of 2.78,4.17,5.56,6.97, and 8.34 m/s to determine the optimum disc type and disc cutting speed that fitful a higher ratio of correct cutting stem length. Also, the same procedures were made with the optimum disc linear speed 6.97 m/s, and 100 teeth discs with fingers lengths of (125mm,150mm,175mm, and 200mm) at three fingers angles (0^o,10^o, and 20^o). The results indicated that the optimum parameters were at 6.97 m/s disc linear speed, 100 teeth discs type, 150 mm finger length, and finger angle 10^o that gave average percentage of a correct stem cut length 93.31 %. The machine productivity at the optimum parameters was 0.0576 Mg/h from freshly cut flower gave 0.01973 Mg/h dried flowers. The total operating costs were 33.07 EGP/h. The machine indicated NPV of 2747.24 EGP at 14 % interest rate, and payback period 1.28 year with rental price 60 EGP/h. The cost of one Megagram of dry crop harvested by the machine was 1676.51EGP/Mg against 7785.89EGP/Mg of the crop collected by hand.

Keywords

Main Subjects

Agricultural Power and Machinery Engineering

References

Andis, Ā. and T. Henn (2014). Relation between mechanical and electric power at longitudinal sawing. Forestry and wood processing. Research for rural development. Volume (2).

Brabandt ,H. and D. Ehlert (2011). Chamomile harvesters: A review. Ind Crop Prod 34: 818-824.

Branislav, V.; D. Adamovic ; M. Martinov ; M.Viskovic ; M. Golub1 and S. Bojic (2014). Mechanized harvesting and primary processing of Calendula officinalis L. inflorescences. Spanish Journal of Agricultural Research 12(2): 329-337.

Dachler,M. and H. Pelzmann (1999). Arznei- und Gewürzpflanzen(Anbau, Ernte, Aufbereitung). Agrarferlag, Wien, Austria: 352.

Herold, M.; F. Pank ; E. Menzel,; H. Kaltofen,; E. Loogk, and H. Rust (1989). Verfahrenstechnische Entwicklungen zum Anbau von Chamomila recutia L. (Rauschert) und Calendula officinalis L. für die Gewinnung von Blütendrogen. Drogenreport 2: 43-62.

Hecht, H.; T. Mohr, and S. Lambrecht, (1992). Mechanisierung der Blütendrogenemte. Landtechnik 47: 276-280.

Hendawy, S.; M. Abd Elwahab and W. Abel Moez (2013). Calendula. Upgrading the medicinal and aromatic plants value chain- Access to export. Guidelines for the production and handling medicinal and aromatic plants. EMAP. second edition:1-12.

Kisgeci, J. and D. Adamovic (1994). Gajenje lekovitog bilja. Nolit, Beograd, Srbija: 213.

Khalid, K.A. and JA. T. da Silva (2012). Biology of Calendula officinalis Linn.: Focus on pharmacology, biological activities and agronomic practices. Med Aromat Plant Sci Biotechnol 6(1): 12-27.

Katharina,B. and D. Ehlert (2014). Methods for evaluation of picking performance of Chamomile (Matricaria recutita L.) harvesters. Part II: Development of new methods Journal of Applied Research on Medicinal and Aromatic Plants.

Mohr, T. (2002). Untersuchung und Weiterentwicklung einer Erntemaschine für Heilpflanzen. Z Arznei- Gewürzpflanzen7 (Sonderausgabe): 96-202.

Martinov, M. and D. Adamovic (2002). Mechanized harvesting of pyrethrum (Pyrethrum cinerariaefolium Trev.)– First Testing. Med Plant Rep 9: 23-27.

Martinov, M. and M. Konstantinovic (2007). Harvesting. In: Medicinal and aromatic crops. Harvesting, drying, and processing (Öztekin S, Martinov M, eds.). The Haworth Press Inc., NY, (USA): 56-84.

MOALR “Ministry of agriculture and Land Reclamation” (2019). Bulletin of the agricultural statistics. Part (1) Winter Crops, 2017\ 2018.

Oida , A. )1997(. Using personal computer for agricultural machinery management. Kyoto University. Japan. JICA publishing.

Stanford, J. L. (1980). How to calculate required horse power for circular saw. Issue 10 of Technical report (United States. State and Private Forestry. Forest Products Utilization).

Stanford, J. L. (1985). Balanced saw performance. Issue 12 of Technical report (United States. State and Private Forestry. Forest Products Utilization).

Stanford, J. L. (1993). Circular sawmill and their effective operation. USDA Forest Service State and Private Forestry.

Theraja, B.L. and A.K. Theraja, (2005). A text book for electrical technology. S.chand &company limited. Vol. 1.

Thin Kerf (2016). Alignment procedures and instruments for edgers. Precision alignment tools. Publication (2).

Veselinov, B.; D. Adamovic, and M. Martinov (2008). Investigation of possibility of mechanized marigold inflorescences harvesting. Bull Hops Sorghum Med Plant 81: 22-33.

Willoughby, R.A.; J.B. Solie ; R.W. Whitney; N.O. Maness and M.D. Buser (2000). A mechanical harvester for marigold inflorescences. Proc ASAE Annul Intonational Meeting, Milwaukee, WI, USA: 1-14.

Zimmer, S. and J. Müller (2004). Harvesting technology of medicinal and aromatic plants. Gülzow technical discussions: 22-100.