AN ENNOVATING PRECISION SOWING UNIT FOR TRAY NURSERY

Mohamed, Tarek; EL-Ghobashy, Hossam M. T.; EL-Ashker, Adel A. M.; Hamed, Ahmed R.

doi:10.21608/mjae.2017.96460

AN ENNOVATING PRECISION SOWING UNIT FOR TRAY NURSERY

Document Type : Original Article

Authors

Researcher, Agric. Eng. Research Institute (AEnRI), Dokki, Giza, Egypt.

10.21608/mjae.2017.96460

Abstract

Aportable compact precision plug trayvegetable seeder wasmanufactured in Agricultural Engineering Research Institute (AEnRI) workshop to plant fine and large vegetable seeds with low cost and high seed singulation ratio. The seeder was depended on a controlled negative and positive pressure passed through a set of nozzles to pickup and drop the seeds into the tray cells. For tomato seeds, four nozzles holders equipped with 209 nozzles with inner diameters of (0.47 mm, 0.62 mm, 0.76 mm and 1 mm for each set) were tested with negative pressure of (1, 1.25, 1.5 and 1.75 kPa). For cantaloupe-melon, four nozzles holders equipped with 84 nozzles with inner diameters of (0.76 mm, 1.00 mm, 1.2 mm and 1.4 mm) were tested with negative pressure of (6, 7, 8 and 9 kPa). The performance of the seeder was evaluated using seed singulation efficiency, seeding efficiency, seeder productivity, specific energy requirement and seeding cost. The machine succeeded to plant large and small seeds in different types of plug trays. The optimum nozzle diameter for planting tomato seeds was 0.62 mm operated at negative pressure of 1.25 kPa that gave percentage of single seed 89.95%, double seeds 4.79%, multiply seeds 2.39% and missed seeds 2.87%. Meanwhile, the optimum nozzle diameter for planting the cantaloupe-melon seeds was 1.20 mm operated at negative pressure 8.0 kPa that gave percentage of single seed 94.05%, double seeds 2.38%, multiple seeds 2.38% and missed seeds 1.19%. The productivity of precision vacuum trays seeder was 320 tray/ h (66880 and 26880 cells/ h) for tomato and cantaloupe-melon seeds respectively. The total power requirement for the seeder was 1.075 kW.h for tomato seeds and 1.216 kW.h for cantaloupe melon seeds. The consumed specific energy was (3.36×10^-3 kWh/ tray) for tomato seeds and (3.80×10^-3 kWh/ tray) for cantaloupe melon seeds.

The total operating cost was 43.37 LE/h. The cost of one tray seeded by the machine was 0.14 LE/ tray comparing with (0.67 and 1.67) LE/try for hand seeding of (cantaloupe melon tray and tomato tray) respectively. The total fabrication cost of the seeding machine was 15000 LE with 2016 price level. The rental value of mechanical seeding per tray was 0.20 LE. The seeding machine indicated net present value (NPV) of 2930 LE at 11 % interest rate. The seeding machine payback period was about 1.3 year.

Keywords

Main Subjects

Agricultural Power and Machinery Engineering

References

Abalone, R., A.Cassinera, , A.Gastón, , and M. A. Lara. (2004). Some physical properties of amaranth seeds. Biosystems Engineering, 89(1): 109-117. doi: 10.1016 / J. Biosystemseng.

Bakhtiari, M. R. )2012(. Design, development and evaluation of a kenaf pneumatic seeding machine. PhD Thesis, University Putra Malaysia, Kuala Lumpur, Malaysia. Retrieved from http://www.upm.edu.my.

Chancellor, W. J. )1981(. Substituting information for energy in agricultural. Trans. ASAE, Paper No. 0001-2351.

Chen, J. M., C. C. Yu, J. H. Lei, J. M. Yu , and C. F. Chang.)1993(. A multipurpose vacuum seed planter for vegetable crops plantings. Journal of Agriculture and Forestry, 42(1), 1–18.

EL-Ghobashy, H. M., T. H. A. Mohamed, A. M. EL-Ashker ,and Y. A. Shabaan.)2016(.Development of a Locally Vacuum Vegetable Seeder for Nursery TraysJ.Soil Sci. and Agric. Eng., Mansoura Univ., Vol. 7(8): 595- 602.

Gaikwad B.B, N.P.S. Sirohi , and A. Kumar.)2007(. Studies on Vacuum Singulation of Seeds for Sowing Nursery Plug Trays. Journal of Agricultural Engineering . Vol.44, 54- 59. Print ISSN : 0256-6524.

Gaikwad B.B. and, N.P.S. Sirohi.) 2008(.Design of a low-cost pneumatic seeder for nursery plug trays. Biosystem Engineering. 322 – 329.

Hanacek, W. A. and P. Bickel.)1984(. United States Patent. Patent No. 4,466,554.

Kim, D. E., Y. S. Chang, S. H. Kim, and G. I. Lee.)2003(. Development of vacuum nozzle seeder for cucurbitaceous seeds (I)-design factors for vacuum seeding large sized seeds. Journal of the Korean Society for Agricultural Machinery, 28(6), 525–530.

Oida , A. )1997(. Using personal computer for agricultural machinery management . Kyoto University. Japan. JICA publishing.

Singh, R. C., G. Singh, and D. C. Saraswat. )2005(.Optimization of design and operational parameters of a pneumatic seed metering device for planting cottonseeds. Biosystems Engineering, 92(4): 429-438.

Sriwongras P. and P. Dostal. )2013(. Development of seeder for plug tray. MENDELNET . 867-871.

Tawfik, H.A.) 2014(. Developing an automatic mechanism for precision seeder. Ph. D. thesis. Agric. Eng. Dept., Agric. Fac. Mansoura Univ.

Zhao Z., L.Yaoming, J. Chen, and X. Lizhang. )2010(. Numerical analysis and laboratory testing of seed spacing uniformity performance for vacuum-cylinder precision seeder. Biosystems Engineering, 106, 344-351.

Zigmanov, P. )1997(. Efficiency of Machine Sowing of Vegetable Seed into Containers. Novi Sad, Yugoslavia. (p 92).